A simple, but robust universal camera bracket for mounting wireless receivers onto camcorders or DSLR cameras.
The bracket can be mounted to either the camera 1/4" mounting point (if available) or the flash shoe. The bracket holds the receiver(s) on four soft grip pads, held down by the use of two back to back Velcro straps.
Suitable for most portable wireless receivers.
(NB Radio mic NOT included!)
|
 |
50mm wide eleasticated garter belt with Velcro fastening, suitable for most makes of transmitter. Available in black or white.
Available in one size.
Manufactured by First Sense
|
|
50mm wide eleasticated belts with Velcro fastening, suitable for most makes of transmitter. Available in black or white, 4 sizes.
Manufactured by First Sense
|
|
A new and improved version of the stereo Back-to-Back clips will soon be available! The new clips are capable of holding 19-25mm diameter mics, and slab-sided MKH microphones in M/S stereo as before - but now have a soft grip surface on the internal edges to prevent microphones from slipping or rotating inside the clips.
|
|
a 60cm Hirose to Hirose, male to male cable for powering your mixer etc from a NP shoe or similar.
|
|
This is a straight 5pin lemo to TA3 as used on the Sound Devices 552 with the addition of a split to an Apple mini-jack.
This popular cable allows you to use your iPad or iPhone as a T/C display for your Sound Devices 552!
|
|
From Remote Audio, Nashville, USA.
This is brilliance, in a cable... a bit of an overstatement possibly, but, if you have bought a boompole with an internal coiled cable with an end mounting XLR then you will love this coiled cable... plug in its right angled female XLR connector into the boom mounted connector and you are away! (The right angled connector thus saving the cable from damage when standing the boom on its end on the floor!)
(The angle of the R/A connector can be altered to suit side mounted XLR ports on the Ellite Series boompoles by PSC Audio)
Remote Audio Coiled Boompole Jumper XLR Cable. Extends from 2 feet to 7 feet. fitted with a 3-pin right angle female XLR to straight 3-pin male XLR.
REM CAXJCOIL
|
|
Wiring talent for sound has never been easier, no matter what they're wearing. Simply Velcro the MicBras soft, adjustable strap around the upper torso, and place the lav mic in either of the strap's two mic slots and you are ready to shoot. Simple, quiet, convienient. The Mic Bra is available now from Soundkit. Each package contains one beige and one black MicBra.
These are ideal when the talent is wearing flimsy tops, helps eliminate clothing rustle/noise and wind noise and popping.
|
|
Koala Soundman Sun Hats
Price: £34.00 (Excluding VAT at 20%)
Selecgt Size
|
|
Maximum sun and hearing protection combined, allows the sound recordist, sound mixer or boom operator environmental protection while wearing headphones. The Koala Sun Hat has a 4 inch brim and is built with neck protection, made of cotton fabric, and is about 10 inches long with ventilation slits, that allow air passage around back of the neck. Terry toweling sweat stop headband, and absolutely no sun penetration. Machine washable.
Available in Medium, Large, X-Large, XX-Large, and XXX-Large.
|
|
A great little gadget from those lads at NoyzToyz... a hairclip / mic mount... we don't need to say any more really!
They come in pairs, it is recommended to place one on the cable about 6 inches from the mic capsule and the other holding the capsule... with the 'Teeth' pointing away from the capsule... then place it in the talent's hair.
Available in Black, Brown or White
For fitting instructions click here
|
|
Finally a vampire clip for the Sanken COS 11! Designed by a location sound mixer. The Vclip vampire clip was created exclusively for use with all models of the Sanken COS 11 lavalier microphone. Facilitates quick mounting of your microphone to many clothing materials without sacrificing sound quality. The mic capsule slides into the Vclip tubing for a snug fit.
Available Colors: Black
More pictures...
|
|
Introducing the sequel to the Vclip. Using the same Vclip design the Vclip-WS gives you the alternative option of mounting your Sanken COS 11 with the Sanken WS-11 windscreen. Available in black only, windscreen not included!
|
|
The new Hot-Bloc adaptor simply mounts to the camera hot-shoe and provides three more hot-shoe mounts.
Genius in simplicity - why didn't the clever folks at Hawk-Woods think of it sooner?
|
|
Joe Sticky Stuff is a wonderfully versatile adhesive for use on movie sets or anywhere that you need effective adhesives that are pliable and removable with no left over residue or damage. This includes microphone placements that require secure mounting and quick removal. No holes, no peeling drywall. Joes Sticky Stuff comes in a reusable tin container with 21.5 ft of material 1/2" wide.
|
|
Handy Elastic Ties For Unruly Items
Bongo Ties make organizing loose and unruly items quick and easy. Use for binding when storing your cables, dressing cables for neatness or hundreds of other uses during your production day. The binding closure is accomplished with a simple button type design. This incredibly useful tool is made of high quality natural rubber and wood. Sold in packs of 10 each.
|
|
Full range passive direct boxesIsolation transformer eliminates noiseVery low harmonic and phase distortionCompact and rugged designIdeal for live sound and studioMono (ProDI) or stereo (ProD2) models
The Radial ProDI's are high-quality, full-range passive direct boxes equipped with custom made audio transformers for exceptional signal handling without saturation and with extremely low phase distortion in the critical bass and mid regions. The result is exceptional clarity and definition at an attractive price point. Ultra-compact and made of 14 gauge steel, the ProDI model feature internal I-beam construction with a 'book-end' outer shell for extreme durability in the most demanding environments. These exceptional direct inject boxes offer performance superior to any other DI's in their price range and are ideally suited for use with acoustic guitar, bass and keyboards.
This is an ideal solution for when you are presented on location with having to record the output of a keyboard, laptop or PC or any other unbalanced line level source...
|
|
 Professional Sound Corporation® has been a leader in the design and manufacture of condenser microphone power supplies. The 12T and Universal Microphone Power Supplies are industry standards with thousands of units in use today. Their rugged, yet user friendly design has made them the most widely used power supplies on the market. With this in mind, PSC set out to design and build a new PSC 48 PHantom Microphone Supply specifically for use with the newer condenser microphones.
This new design was conceived as a simple alterative to our Universal Microphone Power Supply. Many of the new condenser microphone designs contain user switchable pads and low cut filters. Because of this, they have eliminated these functions from their new PSC 48 PHantom Microphone Supply. This supply utilizes a modern current control feedback regulator circuit to provide a constant 48 volts regardless of the current consumption of the microphone. Thus, it can power any 48PH microphone with ease and efficiency. The PSC 48 PHantom Microphone Supply operates from a single 9V alkaline battery for 10 to 30 hours. The unit is housed in a rugged, black anodized, aluminum case. A sturdy, removable belt clip is included.
Specifications...
|
|
Now here's a thing! The Eumel (German for widget) has a 6 pin Lemo input and a 3 pin male XLR output. Use your Tram, COS11 or whatever on phantom power!
|
|
I don't think I need to put in a picture of this. It's the tie, or croc. clip for the ever popular Tram TR50 |
|
Drac. or vampire clip for the ever popular Tram TR50 |
|
That funny little rubber mount for the ever popular Sanken Cos-11. Beige in colour. All the other mic. clips and accessories are in the relevant microphone sections. |
|
That funny little rubber mount for the ever popular Sanken Cos-11. Black in colour. All the other mic. clips and accessories are in the relevant microphone sections. |
|
Designed for use with Lavalier microphones worn on the outside of clothing, the Lavalier Windjammer™ (or Furry) is the most heavy-duty of Rycote's subminiature Lavalier microphone products. It is suitable for use in windy outdoor interview conditions, and greatly reduces microphone noise and clothes rustle, while also providing effective wind protection. The Lavalier Windjammer comes in a range of black, grey, and white as standard.
Price each.
|
|
The Lavalier Foam is a discreet, slip-on foam windshield, designed to protect personal microphones against light wind and pop noise.
Made of durable, high quality open-cell acoustic foam, Lavalier Foam windshields offer up to 20dB of pop and wind noise attenuation, whilst avoiding concurrent high frequency loss. Engineered exclusively for Rycote, this high quality foam also provides excellent resistance against the damaging effects of moisture and UV light.
An effective, low profile windshield solution for personal microphones, the Lavalier Foam is available in a range of Black, Beige and Brown colours.
Supplied in a pack of 5
Microphone Compatibility
|
|
These are from Rycote and they are great! A disposable mounting system for personal microphones designed to minimise clothing rustle and low level wind noise. Each pack includes 30 adhesive pads and 30 soft fabric covers. The adhesive is suitable for use on fabrics & skin.
More info...
|
|
Like Undercovers, Overcovers are a semi-disposable mounting & windshield system for personal microphones. Supplied with 3 sheets of the same double-sided adhesive pads as the Undercovers and 6 reuseable fur covers - 2 of each colour - black, grey and white.
More info...
|
|
Top-up pack of 30 adhesive pads for use with Undercovers / Overcovers.
|
|
Top-up pack of 100 adhesive pads for use with Undercovers / Overcovers.
|
|
Made by Shure this is a female XLR barrel with a transformer to match microphones with balanced XLR outputs to cameras with minijack inputs. This means that you can use long cables without hum and interference. Note - this little device is not magic - it does not provide phantom power so the microphone should have an internal battery. Give me a ring on 029 2034 2907 if you're not sure about this. |
|
From the Rycote stable - a foam wind gag for shotgun mics.
Suitable for the following microphones:- Sennheiser MKH 60 Sony ECM 672 |
|
From the Rycote stable - a foam wind gag for shotgun mics.
Suitable for the following microphones:- AKG C 568 EB, CK 68 ULS C460B Red Azden SG(M)-1X BeyerDynamic MCE 87vs, MC 836, MC 716, MC 726, MCE 86 N (C) S, MC 736 ClockAudio C850EDPA 4017 JVC DY-70U Røde NTG-3 Sanken CS 3 Sennheiser MKH 416, MKH 418, ME 66 K6, ME 80 K3USony ECM 680S, ECM 670, ECM 678 |
|
From the Rycote stable - a foam wind gag for camera mics.
Suitable for the following microphones:- SONY BVP5/BVP, BVP537, BVW |
|
