Portabrace equipment bags
Portabrace make an absolutely enormous range of bags for everything from mixers, microphones and recorders to all those weird things like cameras,
tripods, monitors etc etc. this is just a small selection but I do supply the full range so if you don't see what you want - give me a call on (029) 20342907 |
|
AR-788CL8 (NEW Product - In Stock) |
The (AR-788/CL8) case holds Sound Devices 788T and CL8 the way you want it.
The CL-8 can be positioned top or bottom, with room for your NP1 style (or similar sized battery) stored neatly below the CL8 using the black folding interior compartment. Use adhesive backed Hook fastener (Velcro) to hold the battery box or adapter firmly inside the folding interior compartment. Three fabric covered foam blocks support (and protect the CL8 cable) the unit and various size standard batteries that connect to the bottom of the 788T.
Balance the equipment perfectly by choosing the right series of rings for your personal rig. The protective rain boot seals around XLR cables or folds neatly open. Flaps for the other openings do the same. The clear vinyl window zips on/off or rolls up (and can be fitted front or back fastened).
To accomodate all the extra channels of radios that you will want to use with the 788T this bag is supplied with the expanded RM-MULTI.
The bottom unzips for table-top use and quick access to standard battery, storage cards USB and other connections. For heavy loads and prolonged use, the the (see the AH- series) harness/belt combinations, or upgrade your shoulder strap (see: HB-A1).
Simply put, if you buy this, you will get a bag that will house your 788T & CL-8, the Radio Mic pocket with the built in front accessory pocket, a shoulder strap and the internal battery pocket/holder.
Price: £195.00 (Excluding: VAT at 17.5%)
|
|
MXC-552 (NEW Product - In Stock)
The (MXC-552) set comes with the new radio mic case (RM-MULTI/E extreme) and the suede shoulder strap (HB-10). It is a modular case, which can be ganged with many Porta Brace Audio Recorder Cases (AR-series). The modular design gives you the flexibility to change the combination of equipment that each job demands. The cases are padded and custom fitted, providing access to switches, cables, batteries, and other important controls while protecting the gear from rain, snow, dust and other damaging forces. (see RM-MULTI/E link)
Price: £164.00 (Excluding: VAT at 17.5%)
|
|
MXC-SQ4S
For SQN 4S Series IV and SQN-5
Price: £164.00 (Excluding: VAT at 17.5%)
|
|
MXC-SQ4
For SQN4S Series II and III
Price: £164.00 (Excluding: VAT at 17.5%)
|
|
MX-302 MINI
A fantastic little Portabrace bag for the Sound Devices 302.
It has a loop on the back so it can slip onto your belt, and comes with a lovely padded leather shouler strap.
It has one accesory pocket sewn onto the front for your radio mic receivers (inside there are even two holders where you can clip on the receivers so they do not roll around in the bottom of the pouch). There are small velcroed sealable cable portals from the pouch to the mixer!
It has a small rain flap fitted to the bag which can easily be folded over.
Sold only to loving smoke and dust free homes! ;o)
Discounted, must go!
Price: £102.00 (Excluding: VAT at 17.5%)
|
|
MXC-302
For Sound Devices 302
Price: £140.00 (Excluding: VAT at 17.5%)
|
|
MX-24
For Sound Devices Mix-Pre. This bag is slightly different from those above as the accessory pocket is integral and not detachable.
Price: £130.00 (Excluding: VAT at 17.5%)
|
|
AR-7
For Sound Devices 744T, 722, 702T and 702 recorders.
Price: £160.00 (Excluding: VAT at 17.5%)
|
|
AR-FR2
For Fostex FR2
Price: £185.00 (Excluding: VAT at 17.5%)
|
|
AR-PMD661
The AR-PMD661 case is custom made for the recorder. A thin, clear vinyl window protects controls while you use them. You have access to and protection to all cables and switches. It can be worn on a belt or over the shoulder. The wide belt loop (see belts: VB-10 and BP-2Belt only) area is designed to quickly change batteries. When using a belt see Mic Holster and small mixer cases below. Mesh openings allow speaker play back. Small rings are connection points for Porta Brace shoulder straps.
Price: £145.00 (Excluding: VAT at 17.5%)
|
|
AR-PMD660
For Marantz PMD660
Price: £145.00 (Excluding: VAT at 17.5%)
|
|
AH-2
Spreads the weight of your soundkit evenly across your back and shoulders rather than hanging it all on one side.
Price: £75.00 (Excluding: VAT at 17.5%)
size
|
|
AH-3-MEM
De-luxe version of the Audio Harness with Memory Foam padded shoulder straps. The foam "remembers" your body shape for a comfortable, contoured fit.
Price: £185.00 (Excluding: VAT at 17.5%)
Size
|
|
Audio Organizer
General purpose Audio Organizers are a versatile way of carrying all your sound kit. There is one large main compartment so your mixer can be positioned to suit your needs, the main outside pocket can be removed and attached to either side and cables can be routed into all exterior pockets.
Price: £260.00 (Excluding: VAT at 17.5%)
Main compartment size
|
|
PC-333
The largest of the Medium Production cases the PC-333 has a main compartment measuring 18" x 10" x 10" internally. Shaped by rigid panels it comes with a divider kit, there are three large outside pockets, two end pockets and mesh pockets in the top flap.
Price: £270.00 (Excluding: VAT at 17.5%)
|
|
PC-202
Middle of the Medium Size Production case range, the PC-202 main compartment measures 10.5" x 6.5" x 11.5" internally.
Price: £210.00 (Excluding: VAT at 17.5%)
|
|
PC-111
Smallest of the Medium Size Production cases the PC-111 main compartment measures 13.25" x 6.5" x 8" internally.
Price: £220.00 (Excluding: VAT at 17.5%)
|
|
RB-1
All the Run Bags have a padded main compartment with padded rigid bottom. A Divider kit lets you customize the interior space, there are two large zippered outside pockets. This RB-1 model has internal dimensions of 18" x 7" x 9.5"
Price: £145.00 (Excluding: VAT at 17.5%)
|
|
RB-2
As above but 21" x 7" x 9.5" internally.
Price: £155.00 (Excluding: VAT at 17.5%)
|
|
RB-3
As above but 25" x 7" x 9.5" internally
Price: £170.00 (Excluding: VAT at 17.5%)
|
|
RB-4
As above but 30" x 8" x 11" internally.
Price: £185.00 (Excluding: VAT at 17.5%)
|
|
CAR-1
Cargo cases have three large outside pockets, multiple slip pockets, a rigid frame and movable dividers. This CAR-1 model has internal dimensions of 13" x 8" x 10"
Price: £160.00 (Excluding: VAT at 17.5%)
|
|
CAR-2
As above internal dimensions 18" x 8" x 10"
Price: £170.00 (Excluding: VAT at 17.5%)
|
|
CAR-3
As above but internal dimensions 21" x 8" x 10"
Price: £190.00 (Excluding: VAT at 17.5%)
|
|
PC-3
The PC-3 is a monster! Largest of the Large Size Production Cases it has internal dividers, mesh pockets in the lid, quite a few external pockets and a heavy duty shoulder strap. Internal dimensions 27.5" x 8.75" x 12.75"
Price: £364.00 (Excluding: VAT at 17.5%)
|
|
PC-2
Similar to above but internal dimensions 21.5" x 8.5" x 12.5"
Price: £324.00 (Excluding: VAT at 17.5%)
|
|
PC-1
Similar to above but internal dimensions 16" x 9" x 16"
Price: £278.00 (Excluding: VAT at 17.5%)
|
|
SZW-3
Most airlines allow hand luggage up to 45" (L+W+H) and the Size Wize Travel Case is exactly that. A divider kit enables you to customise the 22" x 8" x 13" main compartment.
Price: £315.00 (Excluding: VAT at 17.5%)
|
