Parts List: (figure 1)
1. Thumb wheel (Female - 3/8” UNC)
2. Shoe foot & 3/8” Male thread
3. Extension Bar (100 mm)
4. Thumb wheel (Female - M6)
5. Cable clamp (part of Extension bar)
6. InVision Video™ Bar
7. Lyre suspension™
8. Microphone clip (19-25 mm)
9. ¼” Male to Female thread adaptor
10. Hot Shoe Extension™
11. Miniscreen Windshield™
12. Miniscreen Windjammer
13. Hex Head Key
14. 3/8” Boom Swivel
15. Camera Clamp Adaptopr
InVision™ Video Microphone Mount
The InVision Video mounts use the patented “Lyre” technology first introduced by Rycote in 2007 in the S-series and provides excellent vibration isolation against handling ?& camera motor noise.
The Lyres are made from a specialist material, Hytrel, which allows the suspension to operate effectively in temperatures from minus 35°C (-31°F) to over 100°C (212°F).
The clip is designed to hold shotgun microphones from 19 to 25 mm in diameter and up to 300 mm in length, including the slab sided Sennheiser MKH range.
A “Soft feel” grip is moulded into the clip, to prevent the microphone twisting or slipping.
The Mount can be rotated 360 degrees around the mounting point & slid in and out allowing the microphone to be positioned in the optimum place on the camera.
A built in cable clamp which provides good isolation against cable borne noise
Lightweight and robust
InVision Video ¼” thumb wheel is fitted with female ¼’ 20 thread allowing additional ¼” components to be used in conjunction with it.>>!
!!<Miniscreen™ Windshield
Black fabric/mesh, slip-on windshield for protection against breeze and wind noise generated through panning
Suitable for microphones 19-25 mm (0.75-1.00”) in diameter
55 mm (2.16”) diameter
Approx. Weight: 51g (1.8 oz)
2 lengths, 14 cm and 18 cm, cover the slots on a wide range of shotgun/rifle microphones. See search function for details
Miniscreen™ Windjammer™
A black fur Windjammer, for use in conjunction with the Miniscreen™.
For use in stronger wind conditions to provide supplementary wind noise protection to that supplied by the Miniscreen™.
Manufactured from short black 10 mm fur to avoid casting any unnecessary shadows when working in camera mounted situations.
Elasticated at one end for easy fitting over the Miniscreen™.
Hot Shoe Extension
The Hot Shoe Extension allows you to fit multiple attachments such as microphones, lights and sound transmitters to your single hot shoe on your camera/camcorder
It also allows you to rotate the attachment 360° around the shoe fixture on the camera
Length of bar: 100mm (4.00”)
Weight: 50g (1.7oz)
Top fitting: Suitable for male flash shoe accessories
Thread used: 3/8” Whitworth male (brass)
|
