Audio A10-Rack

Audio Ltd A10 rack

The A10-RACK is a 1-RU enclosure which accepts slot-in wireless receivers such as the Audio Limited A10-RX or other brand receivers. The A10-RACK features built-in power and antenna distribution plus Dante for up to 4 two-channel slot-in receivers. That is a total of eight channels of Dante, plus AES digital outputs, or analog outputs— all in a single, sleek, 1-RU chassis. The A10-RACK accommodates single-channel Unislot receivers and most two-channel Superslot-compatible receivers, such as Audio Limited’s A10-RX or other models from Lectrosonics and Wisycom utilizing the D-sub 25 pin interface.

Dante

The Digital Audio Network Through Ethernet protocol, better known as Dante™, allows for true networking where signal can be sent to many destinations without degradation or extra hardware. Connect the A10-RACK to a Dante network, and all eight channels of high-quality audio from the wireless receivers can be transported over a single Cat5 network cable. Monitoring and routing of signals from transmitters to receivers is simplified with the Dante Controller, a free software application from Audinate.

The A10-RACK also sports RF inputs with 12V powering of active antennas, plus loop-thru connections for another A10-RACK. This provides seamless integration between two connected A10-RACKs with a single pair of antennas – resulting in reduced complexity for 16-channel configurations and additional cost savings.

The A10-RACK is powered with a standard 4-pin F-XLR 10-18v DC power supply, like the Sound Devices XL-WP4. Other PSUs can be used but they must be capable of providing 3A minimum for proper powering of the A10-RACK and the slot receivers.

Compatible Wireless Receivers

ManufacturerModelCompatible
Audio LtdA10-RXcompatible
Audio LtdEn2 CX2-Pcompatible
LectrosonicsSRacompatible
LectrosonicsSRbcompatible
LectrosonicsSRccompatible
WisycomMCR42compatible

A10-RACK Specifications

Frequency range470-694 MHz
Number of diversity receiversUp to 4
Active distribution amplifier bandwidth224MHz, with phantom powering for active antennas – 12V, 200mA
Antenna inputs2 x BNC 50 Ohms
Aux RF outputs2 x BNC 50 Ohms
Rack powering10 – 18 Volts DC, 3Amps via 4 pin XLR male socket
Audio outputs8 x 3 pin XLR-M analogue and or AES
Other Audio outputs2 x RJ45 to provide Dante™ primary and secondary
Output level+18 dBu maximum, transformer balanced (analogue)
Audio frequency response20 - 20,000Hz ± 1 dB
Service portUSB type B
Size1RU high 19-inch frame
Dimensions (H x W x D)442 mm x 210 mm x 45 mm (without rack ears)
Weight (without receivers)3.6 kg

There are currently no reviews for this item

To leave a review please sign-in.

£1,914.00 £1,595.00ex.VAT
Product Code: AUDA10-RACK
Availability: Normally 3 - 4 days
Ambient Audio Ltd Audio Technica Audio Wireless Audioroot Avington Betso Bubblebee DPA Microphones Hawk-Woods Hide-a-Mic Icon Micron Orca Rycote Sanken Schoeps Sennheiser Sony Sound Devices Swit Tascam Tentacle Sync Timecode Systems Tram VDB Viviana Wisycom Zoom