Wisycom Four channel Radio Mic kit

Wisycom MCR54 4 Channel Radio Mic Kit

The Wisycom MCR54 Quad 4 Channel radio mic kit comes with four transmitters and also includes the HPN54 stand alone receiver base which has a 4 pin Hirose connector for power input and 2 x TA5M connectors for the analogue or digital audio outputs. As standard we supply these kits with B7 transmitters covering 470 to 663MHz but 510 to 698 and DME 960 to 1160MHz versions are also available. Please call for availability

To use the receiver in a super slot housing you'll need an SLK54-IK base plate which is available as a separate item.

MCR54 Quad Receiver

The MCR54 is a 4 channel true diversity wireless microphone receiver system in a modular stand alone or slot in configuration. It is compatible with most camera slots and multi slot receiver housings.

Main Features

• Four channel True Diversity receiver (8 Receiver boards!)
• Small and light but very strong
• DSP Analogue & Digital Audio Output (AES3)
• Up to 790 MHz bandwidth in 470/1260 MHz range
• Next Gen Multiband front-end filtering
• Wideband and Narrowband DSP-FM operation (SW selectable)
• Extremely low noise VCO with ultrafast spectrum scan for quick & easy setup
• High contrast OLED display
• Automatic scan & transmitter programming through infrared and Bluetooth 5 long range
• DSP based for extreme flexibility and multi-companding operations
• Monitor & control through USB C or Bluetooth 5 (long range) on Wisycom Manager 2.0
• Rear antenna connectors and micro audio and power adapter

MTP40S and MTP41s Transmitters

The MTP40S (2 x AA batteries) and 41S (1 x AA battery) transmitters are small and light pocket transmitters and are very easy and quick to use thanks to their OLED displays, dedicated buttons and joggle selector. They also feature the Linear L20 power setting which allows evenly spaced, intermodulation free frequency allocation.

Main Features

• Up to 232 MHz bandwidth in 470/1160 MHz range
• Input dynamic extension with an integrated HW limiter (30 dB above peak
• Enhanced RF robustness with “intermodulation cancellation” circuit
• LINEAR feature @L20 power setting allows evenly spaced frequency allocation intermodulation free
• Miniature design with flexible pcb (no connectors) for extended reliability
• Ultra-light metal alloy body (80g without batteries)
• User selectable multi-companding systems:
• ENR (noise optimized) ENC (voice optimized)
• Battery: 2 AA Alkaline, rechargeable NiMH or Lithium
• Run time: approx. 7h @ 100mW and 20L(=20mW LINEAR) approx. 10h @ 50mW approx. 12h @ 20mW approx. 14h @ 10mW
• Infrared interface for management and firmware update
• Easy and quick to setup thru an Oled display, gain/freq button and a joggle selector
• Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments
• 48V phantom power to use wired mic requires the PHA48 accessory
• Infrared interface for management and firmware update